| Color: | |
|---|---|
| Quantity: | |
The Round Expansion Tank Bracket Kit Steel D42 is a versatile solution designed for mounting expansion tanks in renewable energy systems, including solar thermal, heat pumps, and geothermal setups. Engineered with UV-stabilized materials and weatherproof components, this kit ensures reliable performance in outdoor and exposed environments, from rooftop installations to remote off-grid sites.
Weatherproof Design:
42mm tube compatibility with Q235B steel frame (UV-stabilized galvanization, QUV 2000 hours), resisting fading and coating degradation in direct sunlight (UV index ≥12).
Kit includes waterproof sealant strips and stainless steel fasteners (A4-80), creating an IP65-rated mounting solution for outdoor use (rain, snow, and dust protection).
Adaptive Mounting System:
Adjustable arms (100mm travel) accommodate tanks mounted at angles (≤15°), ideal for sloped rooftops and irregular surfaces.
Lightweight design (3.2kg) with aerodynamic profile, reducing wind resistance (tested to 120km/h) for rooftop installations in coastal areas.
Energy System Compatibility:
Supports 10-100L tanks in solar thermal (glycol-based) and geothermal systems, with rubber isolators reducing vibration from pump operations (noise ≤45dB).
Pre-drilled for pipe clamps (25-50mm), securing adjacent PEX or copper pipes to minimize stress on the tank bracket interface.
Compliance & Efficiency:
Meets ISO 9001 and EN 12976 (solar thermal systems), with thermal insulation pads (R-value 0.5 m²K/W) reducing heat loss from tank surfaces by 15%.
Quick-release components enable easy tank removal for maintenance, reducing downtime in renewable energy systems (turnaround ≤30 minutes).
Perfect for renewable energy and outdoor heating systems, this bracket kit excels in:
Solar Thermal Rooftops: Secures 20-80L tanks in solar water heating systems, with UV-resistant coating lasting 20+ years in desert climates (annual UV exposure ≥3000 hours).
Geothermal Heat Pumps: Mounts tanks in ground-source heat pump setups, resisting moisture and soil corrosion.
Off-Grid Cabins: Used in remote locations with wood-fired boilers, providing reliable support in harsh weather (temperature range: -50°C to +85°C).
Commercial Solar Farms: Supports multiple tanks in large-scale solar thermal installations, with modular design facilitating quick deployment across arrays.
Renewable-Specific Features: Thermal insulation and weatherproofing address unique challenges of solar and geothermal systems, reducing maintenance by 40%.
Design for Sustainability: Manufactured with 90% recycled steel and Cradle to Cradle Silver certification, appealing to eco-conscious energy companies.
Remote Support: Provides digital installation guides and remote diagnostics for off-grid sites, minimizing travel costs for maintenance teams.
Performance Guarantee: 5-year warranty on weatherproof components, with replacement parts available via global distribution network within 48 hours.
Packing details
Option one: (Plywood)
• Packing: each product with a bubble bag, then bulk- packed in plywood box.
• Box size:1200mm (length)*800mm (width)*1100mm (Height).
• Quantity:800pcs to 1000pcs.
• Neutral packaging for all products. .
Option two: (Carton)
• Packing: each product with a bubble bag, then bulk- packed in carton; all cartons put on the plywood pallet.
• Pallet size:1200mm (length)*800mm (width).
• Quantity:150pcs to 200pcs.
• Neutral packaging for all products.
The Round Expansion Tank Bracket Kit Steel D42 is a versatile solution designed for mounting expansion tanks in renewable energy systems, including solar thermal, heat pumps, and geothermal setups. Engineered with UV-stabilized materials and weatherproof components, this kit ensures reliable performance in outdoor and exposed environments, from rooftop installations to remote off-grid sites.
Weatherproof Design:
42mm tube compatibility with Q235B steel frame (UV-stabilized galvanization, QUV 2000 hours), resisting fading and coating degradation in direct sunlight (UV index ≥12).
Kit includes waterproof sealant strips and stainless steel fasteners (A4-80), creating an IP65-rated mounting solution for outdoor use (rain, snow, and dust protection).
Adaptive Mounting System:
Adjustable arms (100mm travel) accommodate tanks mounted at angles (≤15°), ideal for sloped rooftops and irregular surfaces.
Lightweight design (3.2kg) with aerodynamic profile, reducing wind resistance (tested to 120km/h) for rooftop installations in coastal areas.
Energy System Compatibility:
Supports 10-100L tanks in solar thermal (glycol-based) and geothermal systems, with rubber isolators reducing vibration from pump operations (noise ≤45dB).
Pre-drilled for pipe clamps (25-50mm), securing adjacent PEX or copper pipes to minimize stress on the tank bracket interface.
Compliance & Efficiency:
Meets ISO 9001 and EN 12976 (solar thermal systems), with thermal insulation pads (R-value 0.5 m²K/W) reducing heat loss from tank surfaces by 15%.
Quick-release components enable easy tank removal for maintenance, reducing downtime in renewable energy systems (turnaround ≤30 minutes).
Perfect for renewable energy and outdoor heating systems, this bracket kit excels in:
Solar Thermal Rooftops: Secures 20-80L tanks in solar water heating systems, with UV-resistant coating lasting 20+ years in desert climates (annual UV exposure ≥3000 hours).
Geothermal Heat Pumps: Mounts tanks in ground-source heat pump setups, resisting moisture and soil corrosion.
Off-Grid Cabins: Used in remote locations with wood-fired boilers, providing reliable support in harsh weather (temperature range: -50°C to +85°C).
Commercial Solar Farms: Supports multiple tanks in large-scale solar thermal installations, with modular design facilitating quick deployment across arrays.
Renewable-Specific Features: Thermal insulation and weatherproofing address unique challenges of solar and geothermal systems, reducing maintenance by 40%.
Design for Sustainability: Manufactured with 90% recycled steel and Cradle to Cradle Silver certification, appealing to eco-conscious energy companies.
Remote Support: Provides digital installation guides and remote diagnostics for off-grid sites, minimizing travel costs for maintenance teams.
Performance Guarantee: 5-year warranty on weatherproof components, with replacement parts available via global distribution network within 48 hours.
Packing details
Option one: (Plywood)
• Packing: each product with a bubble bag, then bulk- packed in plywood box.
• Box size:1200mm (length)*800mm (width)*1100mm (Height).
• Quantity:800pcs to 1000pcs.
• Neutral packaging for all products. .
Option two: (Carton)
• Packing: each product with a bubble bag, then bulk- packed in carton; all cartons put on the plywood pallet.
• Pallet size:1200mm (length)*800mm (width).
• Quantity:150pcs to 200pcs.
• Neutral packaging for all products.
